Vehicle-Mounted Equipment Manufacturing

5,000 L Combined Jet-Vac 4x2

Can a 5-ton sewer cleaner work in narrow streets?

Yes. The 5-ton model mounts on light trucks such as Isuzu NPS 75 with ~7.5 t GVW, so it maneuvers well in alleys, dead ends, and old city centers. Optional 4x4 suits unpaved roads and job sites.

How long can a 5-ton sewer cleaner run continuously?

With a ~2,000 L clean water tank, expect roughly 2–3 hours of continuous operation. Shorter district or campus routes allow multiple trips per day. Refill at a hydrant typically takes 10–15 minutes.

What blockages is the 5-ton model suited for?

At 100–150 bar it clears typical household blockages (grease, silt, organics) in 150–600 mm lines. Heavier industrial blockages (concrete, roots) are better handled with 15- or 20-ton models.

10,000 L Combined Jet-Vac 4x2

Why is the 8-ton sewer cleaner often chosen in municipal tenders?

It offers the best capacity-to-cost balance. With 4 m³ clean + 5 m³ debris tanks it can work a full 8-hour shift with minimal refill. Common 4x2 chassis like Ford Cargo 1833 and Mercedes Atego simplify parts and service and match typical municipal specs.

What is the difference between 8-ton and 5-ton sewer cleaners?

Capacity and jetting reach: 8-ton has 4 m³ clean / 5 m³ debris vs 2 m³ / 3 m³ on 5-ton. The 8-ton pump often runs 150–200 bar for lines up to ~900 mm; 5-ton runs 100–150 bar up to ~600 mm. Five-ton for tight streets; eight-ton for city-wide work.

What options can be fitted on an 8-ton sewer cleaner?

Remote control, touchscreen panel, water recycling (saving up to ~40% fresh water), CCTV inspection, and manhole lid lifters. Recycling extends time between refills.

15,000 L Combined Jet-Vac 6x2

What operations is the 15-ton sewer cleaner designed for?

Metropolitan main collectors, periodic cleaning for water & sewer utilities (e.g. regional operators), industrial zones, metro/tunnel projects, and large plants. 7 m³ clean + 9 m³ debris supports long continuous runs.

Which chassis options exist for the 15-ton model?

It uses ~26 t GVW 6x2 or 6x4 three-axle trucks. Common choices: Mercedes-Benz Axor 2529, MAN TGS 26.320, BMC 935. 6x4 for rough terrain; 6x2 for mostly on-road work.

How do 15-ton and 20-ton sewer cleaners compare?

15-ton: 7 m³ clean + 9 m³ debris (16 m³ total) on 26 t GVW. 20-ton: 10 m³ + 12 m³ (22 m³) on ~33 t GVW four-axle. Fifteen-ton is more maneuverable in cities; twenty-ton suits uninterrupted heavy industrial duty.

20,000 L Combined Jet-Vac 8x2

What sets the 20-ton model apart?

It is our highest-capacity combined unit: 10 m³ clean + 12 m³ debris, 200–250 bar jetting, and up to 9,000 m³/h vacuum for the toughest blockages (roots, concrete, industrial solids). Touchscreen and remote control are standard.

Which sectors use the 20-ton model?

Industrial zones, large infrastructure (metro, highway, tunnel), refineries and petrochemicals, metropolitan main-line work, WWTP inlet lines, and export projects (Middle East, Africa, Turkic republics).

How does operating cost compare for the 20-ton model?

Higher capital cost but lower cost per ton-km on large jobs. Bigger tanks mean fewer refills; recycling can cut water use by up to ~40%. Steel tanks often last 15–20 years.

5,000 L Water Tanker Truck 4x2

What jobs suit a 5-ton water truck (sprayer)?

Park irrigation, on-site road wetting, small-municipality dust control, and construction site watering. Compact for alleys and campuses; optional 4x4 for unpaved access.

How long to empty a 5-ton water truck?

About 1.5–2.5 hours depending on flow mode: road spray (front+rear) ~1.5 h; park mode (single side arm) up to ~2.5 h. Hydrant refill ~10–15 minutes.

Which chassis match a 5-ton sprayer?

Isuzu NPS 75 (4x4), Isuzu NPR (4x2), Mitsubishi Canter, Ford Cargo 815, etc. 4x4 is popular for districts with many unpaved roads or forest-edge settlements.

20,000 L Water Tanker Truck 8x2

Why is the 8-ton sprayer a municipal favorite?

Best capacity vs cost. An 8,000 L tank can cover the network in an 8-hour shift with 2–3 refills. Ford Cargo 1833 / Mercedes Atego 4x2 keep service and parts simple and match typical tender specs.

What is the monitor (water cannon) for on an 8-ton sprayer?

A 360° roof monitor delivers high-pressure water for distant tree watering, wide dust suppression, and optional fire support. Manual or remote control.

Difference between 8-ton and 5-ton sprayers?

Eight-ton: 8,000 L, longer runs, ~18 t class chassis. Five-ton: 5,000 L, lighter chassis (Isuzu/Canter). Five-ton for narrow streets; eight-ton for city-wide routes.

10,000 L Water Tanker Truck 4x2

Is a stainless tank available on a 10-ton sprayer?

Yes. Standard tank is St-37 steel; optional AISI 304 stainless for drinking water, food-related use, or corrosive environments. Stainless lasts longer and needs no paint.

Where is a 10-ton sprayer typically used?

Metropolitan median/main road watering, industrial dust suppression, mine watering, and large park operations. 10,000 L reduces refill stops; monitor and hose outlets cover wide areas.

Chassis requirements for a 10-ton sprayer?

Needs at least ~18 t GVW when loaded: Ford Cargo 2533, Mercedes Axor 1829, BMC 827, 4x2 or 6x2. A third axle (6x2) improves weight distribution and stability.

15,000 L Water Tanker Truck 6x2

Where are 15-ton sprayers used?

Major city arterials, industrial zone dust control, large sites and mines, landfill dust, and airport apron wetting. Maximum tank volume minimizes refill trips.

Differences between 15-ton and 10-ton sprayers?

15,000 L vs 10,000 L. Fifteen-ton usually needs 6x2/6x4; ten-ton can stay 4x2. Fifteen-ton for wide arterial work; ten-ton when maneuverability matters more.

Is a 15-ton sprayer expensive to run?

Higher purchase price but lower cost per liter delivered on large networks. Fewer refills save fuel and time; 3-axle layout can extend tire life. Steel tanks often exceed 20 years.

Stainless Water Tanker Truck Manufacturing

Stainless vs steel sprayer tank?

AISI 304 resists corrosion, needs no paint, suits potable water. St-37 is cheaper but needs paint/maintenance. Stainless ~25–30 year life vs ~15–20 for maintained steel. Potable/food use → stainless.

Which sectors choose stainless sprayers?

Drinking water distribution (rural municipalities, disaster response), food (dairies, farms, processors), spraying operations, coastal municipalities (salt air), and municipalities investing for long life.

5 Tons Stainless Steel Water Tanker

What jobs suit a 5-ton water tanker?

Farm water supply, campus/site distribution, rural municipal potable runs, nursery/greenhouse irrigation, and small construction sites. Compact for narrow and field roads.

Which chassis fit a 5-ton water tanker?

Isuzu NPR 4x2, Isuzu NPS 75 4x4, Mitsubishi Canter, Ford Cargo 815. 4x4 for farms, hills, and unpaved rural routes.

Is a 5-ton water tanker suitable for drinking water?

Yes. Teknik Tanker drinking-water tankers are built in AISI 304L stainless with food-grade TIG welds and smooth internal surfaces for cleaning. Suitable for municipal distribution, emergency supply, and food industry.

8 Tons Stainless Steel Water Tanker

Why is the 8-ton water tanker popular with municipalities?

Strong capacity/cost ratio: 8,000 L meets typical distribution rounds on common 4x2 chassis (Ford 1833, Atego). Class-B license friendly in many cases; matches standard tender clauses.

Difference between 8-ton and 5-ton water tankers?

Eight-ton: longer distribution loops, ~18 t GVW. Five-ton: 5,000 L on ~8.5 t light chassis. Five-ton for farms and alleys; eight-ton for city-wide service.

What options exist on an 8-ton water tanker?

Monitor, hose reel, metered filling, front/rear spray bars, level gauge, remote control. Metered delivery supports billed water sales.

10 Tons Stainless Steel Water Tanker

Where is a 10-ton water tanker used?

District potable distribution, industrial process water, large construction sites, mine water haulage, and disaster response. 10,000 L cuts refill frequency.

Chassis requirements for a 10-ton water tanker?

Minimum ~18 t GVW: Ford Cargo 2533, Axor 1829, BMC 827, 4x2 or 6x2. Optional third axle improves load split and tire life.

How many people can a 10-ton water tanker supply?

At ~50 L/person/day emergency norm, 10,000 L covers ~200 people for one day. At ~200 L/household/day, about 50 households. Hydrant refill ~15–20 minutes.

15 Tons Stainless Steel Water Tanker

Where are 15-ton water tankers used?

Metropolitan bulk distribution, industrial zones, major construction and infrastructure, mines and quarries, airports/ports, and disaster operations. Fewer trips per day with 15,000 L.

Differences between 15-ton and 10-ton water tankers?

15,000 L vs 10,000 L. Fifteen-ton usually requires 6x2/6x4; ten-ton can use 4x2. Fifteen-ton wins on large-scale and long-haul; ten-ton when urban maneuver matters. Lower cost per liter on fifteen-ton at scale.

Does a 15-ton water tanker need a three-axle chassis?

Yes. ~16–17 t total load with water and tank needs ≥26 t GVW 6x2 or 6x4. Common: Axor 2529, MAN TGS 26.320, BMC 935. Extra axle improves weight distribution and road protection.

20 Tons Stainless Steel Water Tanker

What is special about the 20-ton water tanker?

Largest in the range: 20,000 L minimizes daily refills. Needs heavy 8x4/8x2 chassis (e.g. Actros 3340, MAN TGS 33.420). Built for industry, mines, and mega-projects.

Which sectors use 20-ton water tankers?

Mines and quarries (dust + process water), major construction (concrete/curing), industrial cooling water, power plants, metropolitan bulk delivery, and emergency water convoys.

Operating cost of a 20-ton water tanker?

Higher purchase price but lowest cost per liter moved. Fewer refill cycles save fuel and driver hours. Stainless construction can reach 25–30 year life and improves long-term ROI.

5,000 L Vacuum Truck 4x2

What jobs suit a 3-ton vacuum truck?

Septic service in alleys, historic districts, campus wastewater, rural sewer maintenance, and small site pit dewatering. Compact for places larger trucks cannot reach.

Which chassis fit a 3-ton vacuum truck?

Isuzu NPR, Mitsubishi Canter, Ford Cargo 815, BMC Pro 518. Short wheelbase helps tight turns vs larger units.

Difference between 3-ton and 8-ton vacuum trucks?

3-ton: 3,000 L, maximum maneuverability, light chassis. 8-ton: 8,000 L, longer duty cycles, Ford Cargo class. Three-ton for confined areas; eight-ton for standard municipal routes.

10,000 L Vacuum Truck 4x2

Why is the 8-ton vacuum truck common in municipalities?

Best capacity vs cost; 8,000 L covers many manholes per shift. Common 4x2 chassis lowers maintenance. Matches typical tender requirements.

What is a telescopic suction boom for?

Lets the operator suction from 4–5 m away when the truck cannot park at the manhole—deep shafts, offset septic pits, narrow passages. Improves safety and speed.

What options exist on an 8-ton vacuum truck?

Telescopic boom, cassette boom, high-pressure jetting (combo), hydraulic lid lifters, rear discharge valve, stainless tank. Jetting can convert the unit toward combined sewer duty.

15000 Liter Vacuum Truck

Where is a 15-ton vacuum truck used?

Metropolitan main lines, industrial zone waste, large site pit dewatering, WWTP support, and mine slurry. 15,000 L reduces disposal trips.

Does a 15-ton vacuum truck need three axles?

Yes. Dense waste plus tank can reach ~17–18 t payload; use ≥26 t GVW 6x2/6x4 (Axor 2529, MAN TGS 26.320, BMC 935).

What is a cassette boom system?

A modular hose platform with multiple hose ports spreading suction over a wider working area vs a single telescopic boom—suited to large mains, industrial manholes, and deep pits; often remote-controlled from the cab.

20,000 L Vacuum Truck 8x2

What sets the 20-ton vacuum truck apart?

Highest capacity: 20,000 L vacuum tank, fewer dump cycles, 8x4/8x2 chassis (Actros 3340, MAN TGS 33.420). For industry, mines, and major infrastructure.

Which sectors use 20-ton vacuum trucks?

Mining and quarries (slurry/leachate), large construction (pit dewatering), WWTP sludge transfer, industrial process waste, oil & gas drill mud, and metropolitan trunk maintenance.

Operating cost of a 20-ton vacuum truck?

Higher capital and fuel on 4-axle chassis but lowest cost per liter hauled at scale. Fewer trips save time, fuel, and disposal fees.

5000 Liter Fuel Tanker

What jobs suit a 5-ton fuel tanker?

Construction gensets and machinery refueling, agricultural tractors and harvesters, small dealer/cooperative deliveries, and daily mine-site refueling. Compact for tight yards.

Which chassis fit a 5-ton fuel tanker?

Isuzu NPR, Mitsubishi Canter, Ford Cargo 815, BMC Pro 518. Optional 4x4 for site/farm/mine. ADR equipment is mandatory on all builds.

Can a 5-ton fuel tanker be dual-compartment?

Yes. Typical splits like 3,000+2,000 L or 2,500+2,500 L carry diesel and gasoline simultaneously. Each compartment has its own valves and meter.

8000 Liter Fuel Tanker

Why is the 8-ton fuel tanker popular for distribution?

Best capacity/cost; 8,000 L serves many stops per run. Common 4x2 chassis; class-B license in many cases. Low parts cost.

How does the metering system work on an 8-ton fuel tanker?

Digital meter measures PTO-driven gear pump flow in liters; auto shutoff nozzles available. Totals can be reset with daily/monthly reporting; printer or electronic flow meter optional.

Is aluminum tank available on 8-ton fuel tanker?

Yes. Aluminum is ~30–40% lighter than steel—more product on the same GVW or a lighter chassis. Good corrosion resistance; higher initial cost than steel.

12000 Liter Fuel Tanker

Where is a 12-ton fuel tanker used?

Regional dealer runs, large site machinery fleets, heavy mining/energy refueling, and military/logistics transfers. 12,000 L cuts round trips.

How many compartments on a 12-ton fuel tanker?

Usually 2–3. Common: 7,000+5,000 L diesel/gasoline. Triple splits like 5+4+3 L for three products. Independent valves, meters, and safety gear per compartment.

What ADR equipment is on a 12-ton fuel tanker?

ADR Class 3: extinguishers and cabinets, bonding cable, flame arrester, overfill protection, orange plates and labels, ex-proof electrics where required, emergency shutoff, relief valve, chocks/reflectors.

15000 Liter Fuel Tanker

What sets the 15-ton fuel tanker apart?

Largest standard road tanker in the range: 15,000 L, 6x2/6x4, up to four compartments. For terminals, mines, power plants, and heavy infrastructure.

Which sectors use 15-ton fuel tankers?

Terminal/refinery shuttles, large mines and quarries, thermal and gas power plants, NATO-style military supply, major civils (highway, dam, airport), and industrial fleet fueling.

Operating cost of a 15-ton fuel tanker?

Higher purchase and fuel on 3-axle chassis but lowest cost per liter in high-volume distribution. Fewer trips save tolls, time, and driver hours.

Water Tankers

Which standards are you applying on tanker manufacturing?

We manufacture to international standards under our ISO 9001 quality management system, TSE vehicle-mounted equipment approval, and ADR dangerous goods transport requirements. All weld seams are checked with ultrasonic testing.

How is water tanker capacity determined?

Capacity is defined by the application (municipal irrigation, firefighting, industrial transport), the carrier truck chassis limits, and legal weight regulations. Teknik Tanker produces from 3 to 30 tons across a wide range.

What is a water tanker and what is it used for?

We build tanks from 4,000 L to 24,000 L in ST-37 or ST-52 sheet steel, or in 304L/316L 2B stainless on request. Shells can be rolled to modified elliptical or trapezoid profiles for volume distribution and rear visibility. All shell seams are fully welded on both sides.

Typical applications: transporting and distributing water, road and tunnel washing with pressurized water, and firefighting. Many capacities are available.

Water tanker prices

Water tankers are built to the capacities you need. Teknik Tanker offers models such as 3-ton and 5-ton units among others. Equipment can include single- or two-stage water truck pumps, multi-purpose fire-style pumps, and vacuum-assisted self-priming pumps.

Contact us for manufacturing and equipment supply.

Which truck brands can you mount water tankers on?

We integrate with all major brands including Mercedes-Benz Actros/Axor/Atego, Ford Cargo, BMC Pro, MAN TGS/TGM, Isuzu NPS/NPR, and Renault D series. Chassis integration is engineered separately for each make.

What material options exist for water tankers?

Carbon steel (St37/St52): economical general purpose. Stainless steel (AISI 304/316): drinking water, food sector, and corrosive environments. Aluminum: lighter weight and fuel savings. We recommend based on use case and budget.

What are your delivery lead times?

Typically 45 days for standard models and 60–90 days for custom engineering projects. For urgent needs, ask about vehicles available from stock.

What does the warranty cover?

We provide a 2-year factory warranty covering the tank body, welds, pump system, and piping. After-sales includes 24/7 technical support and spare parts supply.

The Teknik Tanker quality promise for water tankers

Finding a reliable water tanker can feel difficult. With Teknik Tanker you get high quality, long service life, and robust construction.

If you are unsure which tanker to choose, reach us through the contact details on our website.

Vacuum Truck

What is a vacuum truck and what is it used for?

A vacuum truck is vehicle-mounted equipment that suctions and transports sewage, septic waste, and industrial liquids using a vacuum pump. It is widely used by municipalities, industrial plants, and infrastructure contractors.

How is vacuum capacity chosen?

It depends on material density, suction distance, and depth. Liquid ring pumps (7,000–9,000 m³/h) suit intensive daily use; dry-type pumps suit heavier, more viscous loads.

Do you build combined (jetting + vacuum) trucks?

Yes. We manufacture combined units with both high-pressure water jetting and vacuum suction on one chassis, so one vehicle can clean lines and remove debris in the same operation.

Sewer Cleaning Vehicles

Sewer Cleaning Vehicles Prices and Types

The most commonly manufactured trenching machines are:

Approximately 8,000 liters in volume on trucks with a maximum load weight of 18 tons
Approximately 12,000 liters in volume on trucks with a maximum load weight of 26 tons

They can be manufactured on trucks with 2, 3 or 4 axles.
Trenching machine prices vary according to volume. You can contact us for combined trenching machine prices.

What are the uses of a trenching tool?

First and foremost, identifying the sewer problem is crucial. Once identified, Teknik Tanker sewer cleaning machines and a team of experts can begin work to resolve the issue quickly. This ensures the sewers become usable again.

Other Applications:

Industrial cleaning (high pressure)
Surface cleaning (high pressure)
Rainwater channel cleaning (hydrodynamic cleaning)
Cleaning of channels with diameters between 150mm and 1200mm

What is the difference between a combined sewer cleaner and a vacuum truck?

A vacuum truck only suctions waste. A sewer jetting vehicle breaks up blockages with high-pressure water (100–250 bar) and then vacuums debris out. Our combined units integrate both systems so one pass can clean the line and remove waste.

Which truck chassis can sewer cleaning vehicles be mounted on?

We integrate on 2-, 3-, and 4-axle trucks from major brands including Mercedes-Benz Axor/Actros, Ford Cargo, BMC Pro, MAN TGS/TGM, Isuzu, and Renault D. Each project includes dedicated chassis compatibility engineering.

What pump pressure do sewer cleaning vehicles use?

Our high-pressure water pump delivers 100–250 bar at 150–425 L/min. Vacuum pump capacity ranges from 4,100 to 9,000 m³/h. Values are tailored to project requirements.

What is the maintenance interval for sewer cleaning vehicles?

First service is recommended at 500 operating hours; routine service about every 250 hours. All units include a 2-year factory warranty and 24/7 spare parts support.

What is the delivery time for a sewer cleaning vehicle?

Standard models: about 45 days. Custom capacity or heavy options: 60–90 days. Ask about in-stock units for urgent needs.

Fuel Tanker

Is ADR certification mandatory for fuel tankers?

Yes. In Turkey, all vehicles carrying fuel are subject to ADR (Dangerous Goods Transportation) regulations and require a T9 vehicle suitability certificate. Teknik Tanker manufactures all fuel tankers as ADR type-approved to TS EN 13094 standards.

What is the difference between a fuel tanker and a diesel tanker?

They are the same vehicle. "Diesel tanker" is the common colloquial name. A fuel tanker can carry all petroleum derivatives including gasoline, diesel, jet fuel, and fuel oil. Dual-compartment models can carry two different fuel types simultaneously.

What capacities are fuel tankers produced in?

Truck-mounted fuel tankers are produced between 5,000 Lt and 15,000 Lt. Compartment count can be configured between 1 and 8. Use our quote form for the capacity and compartment configuration that suits your needs.

What factors affect fuel tanker pricing?

Main factors affecting pricing: tank capacity (liters), material (aluminum or steel), number of compartments, pump and counter equipment, ADR certification level, and optional equipment such as closed loading systems. Use our quote form for exact pricing.

What does a dual-compartment fuel tanker mean?

A dual-compartment fuel tanker consists of two physically separated chambers within the tank. This enables simultaneous transport of gasoline and diesel with the same vehicle. Each compartment has independent loading/unloading valves.

Water Tanker Trucks

What is a water tanker truck and what is it used for?

A water tanker truck (arazöz) is vehicle-mounted equipment with a water tank and pressurized spray system installed on a truck or tractor chassis. It is used for road washing, park irrigation, dust suppression, drinking water transport, and firefighting. It is manufactured in municipal, industrial, and forestry categories.

How many tons of water can a water tanker truck hold?

Water tanker trucks can carry 4 to 24 tons depending on the carrier vehicle chassis capacity. Municipal types commonly range 4–15 tons, forestry types 5–12 tons, and industrial use 15–24 tons. Teknik Tanker produces custom capacities to match customer requirements.

What is the difference between a forestry and municipal water tanker truck?

Municipal types are designed for urban road washing and irrigation on 2WD chassis. Forestry types are mounted on 4x4 or 6x6 drive chassis for rough terrain. Forestry types include external protective shells, self-recovery winches, dual-pressure pumps (40 bar high pressure), and minimum 200m of various hose equipment.

Should stainless steel be preferred as tank material for water tanker trucks?

Stainless steel (AISI 304L/316L) tanks offer superior corrosion resistance and are preferred for drinking water transport. ST-37/ST-52 sheet steel tanks are more economical and protected with epoxy internal coating. Stainless steel is recommended for drinking water distribution, while steel tanks suit general-purpose road washing and irrigation.

What factors affect water tanker truck pricing?

Key factors determining water tanker truck pricing include: tank capacity (4–24 tons), tank material (steel or stainless), pump type and pressure capacity, truck type (municipal/fire/forest), additional equipment (foam tank, winch, hose reel), and carrier vehicle chassis type. Contact us via our quote form for current pricing.

How does a water tanker truck pump work?

The water pump operates via PTO (Power Take-Off) driven by the vehicle engine through a split shaft transmission. Standard two-stage centrifugal pumps deliver 1,500 L/min at 8–10 bar pressure. Firefighting configurations achieve 250 L/min at 40 bar high pressure. Vacuum-assisted automatic priming enables direct water intake from rivers, lakes, or fire hydrants.

Forestry Water Tanker Truck

What is a forestry water tanker truck?

A forestry water tanker truck is a specialized type built on 4x4 or 6x6 drive chassis for rapid wildfire response in forested terrain, equipped with heat-resistant protective shell, self-recovery winch, and dual-pressure pump system.

How much water does a forestry tanker hold?

Forestry water tankers can carry 5 to 12 tons of water depending on the carrier chassis. The most common capacity in General Directorate tenders is 8–10 tons.

What determines forestry tanker pricing?

Pricing factors include: chassis type (4x4 or 6x6), tank capacity and material, pump pressure capacity, protective shell quality, and additional equipment (winch, foam tank, generator). Contact us for current pricing.

Firefighting Water Tanker Truck

What is a firefighting water tanker truck?

A firefighting water tanker is a fire-truck type vehicle-mounted system equipped with dual-pressure pump (40 bar high, 8 bar low pressure), foam tank, hose reel, and quick-response lance. Manufactured in 3.5 to 12 ton capacities.

What is the difference between a fire tanker and a regular water tanker?

Regular (municipal) tankers use single-pressure pumps (8–10 bar) for road washing and irrigation, while firefighting tankers feature dual-pressure pumps (40 bar + 8 bar), foam tanks, quick-response lances, and hose reels for fire suppression.

What is the foam system on a fire tanker used for?

The foam system provides effective suppression for flammable liquid fires (Class B). Foam forms a film layer on surfaces, cutting off oxygen and preventing re-ignition. It is critical for fires at industrial facilities, fuel storage areas, and ports.

General

Can we visit the factory?

Yes. You can visit our production facility in Kocasinan Industrial Zone, Istanbul. To book an appointment, call +90 212 652 70 70 or use the contact form on our website.

Do you buy and sell used tankers?

Yes. We regularly stock used tankers from our own production. We can also evaluate your existing tanker for trade-in. Contact us for the current portfolio.

Frequently Asked Questions